Pedestal welder CUCITRICE
Pedestal spot welder per cucitura with 120KVA power at 50%.
Column-mounted pointer for sewing with pre-accoupling and adjustable working stroke. The MICRO8 weld synchronous control board with a diode microprocessor controlled in 5 steps is equipped with the double programme and pulses.
| Technical features | CUCITRICE |
|---|---|
| Nominal power at 50% ED | 120 KVA |
| Max short-circuit power | 285 KVA |
| Maximum welding power | 228 KVA |
| Nominal primary voltage | 400/230 V |
| Nominal frequency | 50 Hz |
| Secondary voltage | 6,8:8,6 V |
| Permanent secondary current | 10 KA |
| Short-circuit current | 33 KA |
| Max welding secondary current | 26,4 KA |
| Duty cycle at maximum welding current | 13,8 % |
| Connection power | 136 KVA |
| Power supply cable section (≤ 40 int. line) | 55/90 mm² |
| Air consumption (mc / 1000 points) | 9,2 |
| Water consumption | 5 l/min |
| Pressure at the electrodes at 6 atm. | 900 daN |
| Operation | electropneumatic |
| Cooling | water |
| Distance between the plates | 350 mm |
| Useful depth (plate centre) | 1100-1300 mm |
| Arm lenght | 1000÷1400 mm |
| Arm diameter | ø100 mm |
| Lenght and adiameter of spark plugs | 300÷700 mm ø30÷40 mm |
| Electrodes stroke | 80 pre-accoupling + 20 stroke |
| Compressed air pressure (1 bar=100 KPa) | 600 KPa |
| Dimension L x W x H | 990x500x1880 mm |
| Weight | 860 Kg |